The CanFly® Commander is a Windows application that is used to configure the engine management system.

In addition the commander software is able to log and display engine operational properties, and save the data for future use.

Status Page

The status page of the commander shows all data from the kMAG's connected as well as the kEDU

Status Page

ECU setup page

The commander allows settings for both ECU's to be displayed. When changes are completed the settings can be sent to both ECU's and each reset to apply the new settings.

ECU Page

Data Logger

All data that is published on the CanFly bus can be logged in real-time. This data will be displayed in the logger graph, or can be saved and reloaded as required.

Logger Page